Krion® LUX is a solid surface that stands out not only for its aesthetics, but also for its high resistance and ease of maintenance. Thanks to its physical properties, such as its almost zero porosity and chemical resistance, Krion® LUX is highly resistant to stains and everyday wear and tear. But in addition to being easy to clean, this material offers a unique advantage: the ability to be repaired and regenerated. This means that small scratches or surface damage can be corrected with simple polishing techniques or specific kits, restoring the original appearance and extending the life of the material, which is a significant advantage for projects seeking durability.

What will you discover in this article?

• How to effectively clean and maintain Krion® LUX on a daily basis to extend its life.
• Specific procedures for cleaning conventional and difficult stains.
• Step-by-step techniques for repairing scratches and surface damage on Krion® LUX.

How to clean your Krion® solid surface

It's easy to keep Krion® LUX looking as good as new: thanks to its low porosity, it won't absorb any dirt, and the material can also be repaired or regenerated.

The material is incredibly simple to clean and maintain - which is why it's an ideal choice for worktops in bathrooms, kitchens and retail spaces. Thanks to its sterile qualities, Krion® LUX is ideally-suited to areas healthcare where hygiene is paramount, such as hospitals, laboratories or clinics.

If you want to keep your surface well maintained, free from marks or stains, remove any accidental scratches and keep if looking as good as new, here's what you need to do.

Daily maintenance

Krion® LUX is an easy-to-clean material. But that doesn't mean you don't need to look after it to keep it in top condition.

A little bit of work on a regular basis will keep it looking pristine for longer.

• If you get a mark or stain on your Krion® LUX surface, clean it immediately before it has time to set in - that will make it easier and quicker to clean.
• All you need is a cloth, sponge or microfibre cloth to wipe the surface down daily and get rid of any easy-to-treat marks.

Cleaning common stains

You can get a Krion kit with special cleaning agents and tools for cleaning and maintaining your products or solid surface sheets.

If you get a common household stain on your Krion® LUX solid surface, here's how to get rid of it completely:

• Clean the stain with water and a paper towel or cloth, and remove as much residue as possible.
• Moisten a cloth and apply a mild cleaning solution - avoid anything with a strong acid base. If you're using the Krion® cleaning kit, take the green cloth and apply the special K-CLEANER cleaner to the stain.
• Rub in a circular motion, and then dry the surface. 

If the stain persists, repeat with the cleaning solution or K-CREAM,using enough to cover half the stain.

• Moisten the green cloth and rub the surface in a circular motion without applying any pressure.
• When the stain has vanished, clean the whole Krion® LUX surface with K-CREAM from the cleaning kit to give it a clean, uniform finish.
• Remove any excess cream with the green cloth and rinse with water.

Finally, it's important to dry the surface well to finish off the cleaning process. Use the grey drying cloth from the Cleaning KIT to do this.